Wind-Resistant Automatic High-Speed Roller Shutters – Advantages & Features

The design of wind-resistant automatic high-speed roller shutters offers greater wind pressure resistance compared to standard high-speed shutter series. By increasing the number and density of horizontal wind-resistant bars within the door curtain, the door panel can effectively withstand wind forces of levels 9 to 10, bearing a load of up to 25kg per square meter.

Key Advantages

Key Advantages of Wind-Resistant Automatic High-Speed Roller Shutters include:

  • Excellent sealing performance, dust-free accumulation, high operational stability, and easy cleaning
  • Complies with GMP standards and suitable for clean environments (Class 1000 to 100,000)
  • Widely used in modern industrial plants, including pharmaceuticals, food, electronics, chemicals, tobacco, printing, textiles, supermarkets, precision machinery, logistics warehousing, and zonal separation in clean industrial workshops
  • Provides thermal insulation, dust prevention, noise reduction, and odor isolation, contributing to energy savings
  • Features high-speed automatic opening and closing, with speeds adjustable from 0.6 to 1.5 meters per second
  • Capable of over 1500 high-frequency cycles daily without failure

Safety Features

Safety Light Curtain

An infrared safety light curtain is installed approximately 30 cm above the ground. During descent, if a person or vehicle is detected, the door automatically stops and reverses upward for safety.

Bottom Safety Edge

If the door encounters an obstacle, such as a person or vehicle, while closing, the pressure on the bottom safety edge triggers the system, causing the door to automatically reverse.

Low-Voltage Safety Power Supply

The control system uses a low-voltage safety power supply, with grounding terminals connected to a dedicated earth wire.

Sealing Performance

The curtain bottom is equipped with a weighted sealing flap that closely conforms to uneven ground. Both sides of the frame have sealing brush strips for enhanced tightness.

Construction and Material Options

Frame Material

  • 2.5mm thick galvanized steel plate with high-quality paint finish
  • 2.0mm stainless steel plate, bent and formed
  • 3.5mm industrial aluminum alloy frame

Drive Motor

Standard equipped with German-made SEW high-performance brake motors. Options include 220V/~380V, 50Hz, IP55 rating, power from 0.75 to 1.5 kW, 1500 rpm, capable of handling heavy loads safely.

Activation Methods

  • Manual Push-Button
  • Manual Pull-Cord
  • Remote Control
  • Radar Sensor
  • Inductive Loop (Ground Loop)
  • Photoelectric Sensor
  • Interlocked System (e.g., for double-door interlock)

Ready to upgrade your facility?

Let our experts help you find the perfect RHIDOOR solution for your application.

Contact Us Today